Welcome to
SYSGuard 3001 Main Unit Quick Installation Guide
INTRODUCTION
Box Contents
SYSGuard 3001 Main Unit
4 Assembly Screws
Mounting Kit
12 V DC Adapter
Step 1
Plug-in 12 V DC Adapter to SYSGuard 3001 Main Unit. Wait for the buzzer sound. After the buzzer is
heard SYSGuard 3001 Main Unit is ready to run.
Step 4
Before connecting the sensor to the system, it is necessary to have SYSGuard 3001 Main Unit gone
into Sensor Assignment Mode. Enter “
External Sensor Settings
” section in WebPack interface. Click
on “
Scan For New Sensors
”, SYSGuard 3001 Main Unit will go Sensor Assignment Mode.
Step 2
Main unit is equipped with default IP address
(
192.168.1.141
). For the first access to the
device a PC must be used to access the main
unit and devices should be connected to the
same network.
Your PC should have a static IP in order to
access SYSGuard 3001. You can carry out
these settings in TCP/IP Settings sections of
Local Area Network Connection options.
Step 3
Write
192.168.1.141
on the address bar of your
browser (for instance Internet Explorer) and press
Enter button.
Homepage of the SYSGuard 3001 Main Unit is as
follows: Default user name is “
admin
” and password
is “
123456
”.
SYSGUARD 3001
Environment Monitoring System
COM 1
USB
COM 2
LAN
READY
MENU SET
T/H
Before Installation!
Make sure your device is properly
mounted and ready to operate
safely.
