Manual GhosT-OLED
with
LG 55EW5F-A
11.02.2021
Page
7
of
45
•
Fix the power cable completely. If the power cable is not fixed completely, a fire can
break out.
•
Do not insert a conductor (e.g. a small metal rod or screw driver) into one end of the
power cable while the other end is connected to the input terminal on the wall.
Additionally, do not touch the power cable right after plugging it into the wall input
terminal. You may be electrocuted.
•
The appliance coupler is used as the disconnect device.
•
Please make sure the device is installed near the wall outlet to which it is connected
and that the outlet is easily accessible.
•
As long as this unit is connected to the AC wall outlet, it is not disconnected from the
AC power source even if the unit is turned off
•
Be sure to keep the outlet, AC adapter, and pins of the power plug clean from dust
and etc. This may cause a fire.
•
Do not unplug the power cord while the product is in use. Electrical shock can
damage the product.
•
Use only the power cord supplied with the unit. If you use another power cord, make
sure that it is certified by the applicable national standards when not provided by the
supplier. If the power cable is faulty in any way, please contact the manufacturer or
the nearest authorized repair service provider for a replacement.
1.4
Precautions in moving the product
WARNING
•
Make sure to turn off the product before moving it. You may be electrocuted or the
product can be damaged.
•
Make sure to remove all cables before moving the product. You may be electrocuted
or the product can be damaged.
•
Make sure the panel faces forward and hold the product with at least two persons,
each with both hands to move. If you drop the product, the damaged product can
cause electric shock or fire. Contact an authorized service center for repair.
•
Do not shock the product when moving it. You may be electrocuted or the product
can be damaged.
1.5
Precautions in using the product
WARNING
•
Do not disassemble, repair or modify the product on your own. Fire or electric shock
can occur. Contact us for check, calibration or repair.
•
Prior to every installation, check all mounting threads as well as the rotating
mechanism for any kind of defect and correct function. If a damage or defective
function is detected do not keep using the product and contact us for service.
