Manual GhosT-OLED
with
LG 55EW5F-A
11.02.2021
Page
34
of
45
5.
Connector panel and control possibilities
GhosT-OLED Full Kit, Half Kit and PCAP can be controlled via LAN or RS 232. As both versions
share the same LG Signage Box the information provided by the original
“
LG 55EW5F-A
Owner’s
Manual
”
, and
“LG 55EWF
-A User Guide
”
as well as the original LG LAN control
manual can be applied to all GhosT-OLED products. The manuals are stored on the USB stick
that is included in every delivery.
Subsequently, the most important information are provided:
GhosT-OLED interfaces
Qty
Interface
usage
2
USB IN
Playing content via USB stick (maybe no Touch*
1
)
1
TOUCH USB
(only at PCAP version)
PCAP Touch sensor connection
1
HDMI IN
Video Input
1
DP IN
Video Input
1
DP out
Daisy chaining DP signal
1
LAN IN
Controlling / monitoring
1
LAN out
Daisy chaining LAN signal
1
IR IN
External IR receiver
1
RS232C IN (3,5mm Jack)
Controlling / monitoring
1
RS232C out (3,5mm Jack)
Daisy Chaining RS232 signal
1
AUDIO out
Connecting to external speaker
1
LC out
Daisy chaining LC signal *
2
1
LC IN
Daisy chaining LC signal *
2
*
1
for using GhosT-OLED Touch Kit a PC is necessary (USB A connector) refer to chapter
4.4 Set up GhosT-OLED Touch Kit.
For GhosT-OLED PCAP a PC is recommended but
controlling the OSD is possible by connecting the TOUCH USB port with USB IN port.
*
2
In video wall installations it’s necessary to connect the units with the LC cables
(Luminance Compensation). Refer to original LG 55EW5F-A
Owner’s
Manual, the
User Guide and the Quick set-up guide for detailed information regarding these
connections.
Note:
The Full Kit version offers a modified LC connection via RJ45 CAT Cables, see
Figure 11
(the function of this interface is not affected by the modification)
.
