Manual EVO-LINK-200 series
Version 1.2
20.01.2022
Page
25
of
31
6.2 Fine adjustment (only EVO-LINK-201 and EVO-LINK-211)
For obtaining a more precise and accurate set-up on the pitch and roll directions,
please use the four adjustment screws situated in the middle of the EVO-LINK-
201 and EVO-LINK-211.
By screwing and unscrewing each screw at a time, one opposite to another, one
can adjust EVO-LINK-201/211 in the two directions with an angle of approx. ± 5
degrees.
7. Maximum stacking information
Please refer to the tables below to confirm proper usage.
Do not exceed the maximum number of stacked frames that are presented
in the table below.
Do not exceed the maximum load limit of 200kg for EVO-LINK-200 series.
