Manual EVO-LINK-200 series
Version 1.2
20.01.2022
Page
8
of
31
•
Only use tools to ensure the maximum torque of 10 Nm. This can be done
by lifting the handle and use a torque key at the 13mm nut.
•
Do not use any tools to increase the force that is applied on the handle.
•
If too much force is applied on the handle property damage or serious
accidents can occur.
Figure 4 position of handle and cross recess screw drive
CAUTION
Before installing the frame to the EVO-LINK-200 series truss mount, please
read the frame
’s user manual.
•
The EVO-LINK-200 series truss mount with the frame and the projector
attached must be installed only in an environment that is recommended
by the projector manufacturer.
Prior to any installation, you must do a visual inspection to make sure that
the system is in a good condition. For more information please refer to
chapter: 8. System maintenance and inspection (Re-examination)
Handle
