Manual EVO-LINK-200 series
Version 1.2
20.01.2022
Page
19
of
31
Please tighten the wing nut until the EVO-LINK-200 series and the frame are
not oscillating and are in a safe position.
Always install the EVO-LINK-200 series in a vertical hanging position!
WARNING:
Always secure the truss mount using appropriate
rigging slings
with steel cable insert and shackles
.
Make sure the rigging slings with steel cable insert and shackles are chosen
correctly regarding strength, format and length. You must care for a professional
and correct use of the rigging slings and the shackles. Make sure the rigging
slings and the shackles are strong enough for the load and the dynamic force
when the load falls into the rigging slings and shackles. Please avoid high
dynamic forces by ensuring that the truss mount and the frame will not drop
more than
10cm
into the rigging slings. Depending on your application it is
recommended to use two sets of rigging sling and shackle to avoid too much
dynamic forces as well as the projector swinging.
Please consult the local laws or regulations regarding the additional safety of
hanging equipment.
For further information regarding an appropriate rigging sling with steel
cable insert and shackle please contact us.
