EXACOM
VCR-2020
Copyright 1991, 92, 93, 94, 95, 96 all rights reserved by EXACOM, Inc.
17
4.00 INSTALLATION
4.10 Site Planning
The VCR-2020, like most electronic equipment, should not be subject to harsh
environmental conditions. To assure ease of servicing and reliable operation, several
factors must be considered when planning the system installation. Always consider the
following BEFORE installing the VCR-2020.
A) The VCR-2020 Server may be mounted in several different configurations,
table/desktop, or on a shelf in the general area it will be servicing. Each
installation should use the configuration best suited to permit ease of
serviceability and integration with associated systems.
B) The VCR-2020 Consoles may be 19" rack mounted in the dispatch console or
located on the desk top for supervisor functions. In either case the Console
should be located as close to the server as possible to provide optimum
performance.
C) The VCR-2020 Server power supply operates on 110 or 220 Vac As such,
an appropriate receptacle compliant with local electrical codes must be provided
within 4ft. of the VCR-2020.
D) The VCR-2020 should be located in a well ventilated area having a
temperature range of 0 to 50 degrees C, and a humidity range of 5 to 95% (non-
condensing).
E) Accessibility of the VCR-2020 for servicing and lighting.
F) Protection from flooding, flammable materials, excessive dust and vibration.
4.20 UNPACKING THE VCR-2020 SYSTEM COMPONENTS
Remove the VCR-2020 from the shipping carton and place it on a level working area.
Remove the plastic wrapping and inspect the VCR-2020 for physical damage. If there
is any sign of damage contact authorized service personnel immediately for assistance.
The VCR-2020 should be serviced by authorized service personnel ONLY. Do not
remove the VCR-2020 power supply cover or warranty may be voided.
