manualshive.com logo in svg

Exacom VCR-2020, Technical Manual

Share
Download
Exacom VCR-2020 Technical Manual Download Page 13

EXACOM

VCR-2020

Copyright 1991, 92, 93, 94, 95, 96 all rights reserved by EXACOM, Inc.

13

 

2.30 SYSTEM COMPONENTS

There are three basic components which make up the VCR-2020:

1. VCR-2020 Server
2. (1 to 5) Interface Cards
3. (1 to 20) Consoles (rack mount or desktop)

2.31 VCR-2020 Server

The Server is an EXACOM Micro Computer System, Disk Controller card, Monitor
card,  Hard Drive, Floppy Drive, and Power Supply.  The Server can be configured for
400 up to 1000 minutes of voice storage.

2.32 Interface Card(s)

The VCR-2020 Interface Card(s) is mounted in the Server and provide a digital
communication interface between consoles and the server voice storage unit.  Each
interface card supports up to 4 consoles.  Up to 5 interface cards may be mounted in a
server.  Interface card installation is performed at the manufacturer and fully configured
and tested before shipped.  The interface card contains the VCR-2020 program in
permanent on-board memory.  The VCR-2020 program is self starting on power up and
requires no user intervention.

2.33 Console(s) (Rack mount or Desk top)

The VCR-2020 Consoles are self contained units providing the basic user interface to
the system through a six-button keypad and four-line backlit Liquid Crystal Display
(LCD).  Figure 3 shows the layout and describes the functionality of the interface.

The four-line LCD provides visual feedback to the operator.  The display provides the
operator with time and date of stored messages, as well as other system message related
information.  In addition, during the first 15 seconds of a call, if DTMF digits are
received, they will be stored with the call and displayed during playback.  The Console
also has a speaker with volume control, headset, and cassette tape output jack for
playback monitoring and recording.

Summary of Contents for VCR-2020
































Reviews:

No comments

Brands by name

Popular brands

Load more brands