December 1996
Page 9 of 12
4 Replacing the door
10. With the door lever pushed back, push in the bottom of the door and
rotate it around the hinge pin one and a half turns to tension the spring,
as shown in Figure 11.
11. Holding the door up directly above the hinge pin, pull the door lever to
the front, as shown in Figure 12.
12. Release the door, then push it in to test it. If the door was tensioned
correctly, it will close after you let it go.
Figure 11 Tensioning the door spring
Figure 12 Pulling the door lever to the front
