Exabyte 221L, Product Manual

Page: 116 / 208

100
P
RODUCT
M
ANUAL
1014258
C
HAPTER
6—U
SING THE
R
EMOTE
M
ANAGEMENT
U
TILITY
If you want the library to scan all bar code labels whenever it is powered up or
the door is opened and closed, you can enable the POST bar code scan option.
By default this option is disabled. See page 46 for more information about this
option.
If your bar code labels contain checksum characters, you should enable the
Verify Barcode Checksums option. By default, this option is disabled. See
page 47 for more information about this option.
To enable or disable the bar code scanning options:
1. 1. 1. 1. Click on Configure at the top of the page.
2. 2. 2. 2. Click on Configure the library.
3. 3. 3. 3. Click on Configure library system. A page similar to Figure 6-12 appears.
4. 4. 4. 4. If necessary, enter the remote manager password (see page 105 ).
5. 5. 5. 5. Check or uncheck the Scan Barcode on POST box.
6. 6. 6. 6. Check or uncheck the Verify barcode checksums box.
7. 7. 7. 7. Click on the Change button. The changes take effect.
Figure 6-12 Remote management utility – Library System Configuration page