Exabyte 221L, Product Manual

Page: 113 / 208

A
UGUST
2005 E
XABYTE
221L
AND
221L-FC L
IBRARIES 97
S
ETTING
C
ONFIGURATION
O
PTIONS
7.
7. 7.
7. Enter the current user name and password.
Note: The factory default user name is anonymous and the password is
Exabyte . The user name and password are case-sensitive.
8. 8. 8. 8. Enter a new user name, up to 16 characters.
9. 9. 9. 9. Click on the Change button. The change takes effect.
To change the FTP password:
1. 1. 1. 1. Click on Configure at the top of the page.
2. 2. 2. 2. Click on Configure the interfaces.
3. 3. 3. 3. Click on Configure the network interface.
4. 4. 4. 4. Click on Configure FTP.
5. 5. 5. 5. Click on Change the FTP password. A page similar to Figure 6-9 appears.
6. 6. 6. 6. If necessary, enter the remote manager password (see page 105 ).
7. 7. 7. 7. Enter the current password.
Note: The factory default password is Exabyte . The password is
case-sensitive.
8.
8. 8.
8. Enter a new password, up to 16 characters. Re-type the password to
confirm it.
9. 9. 9. 9. Click on the Change button. The change takes effect.
Figure 6-9 Remote management utility – Change FTP Password page