Exabyte 221L, Product Manual

Page: 105 / 208

A
UGUST
2005 E
XABYTE
221L
AND
221L-FC L
IBRARIES 89
A
CCESSING THE
R
EMOTE
M
ANAGEMENT
U
TILITY
A
CCESSING THE
R
EMOTE
M
ANAGEMENT
U
TILITY
To access the library’s Remote Management utility:
1.
1. 1.
1. Connect the library to your Ethernet network as described on page 22 .
2.
2. 2.
2. If not already powered on, power on the library as described on page 24 .
3.
3. 3.
3. Use the library’s operator panel to set up the Ethernet interface as
described on page 38 . Make a note of the library’s IP address.
4. 4. 4. 4. Launch your web browser and enter the library’s IP address in the
following format:
http://IP address
Run the self test
Position the robot to an element
Park the robot
Home the robot
Scan bar code labels
Move a cartridge page 126
page 126
page 127
page 127
page 127
page 128
Run diagnostic tests –
Scan bar code labels
Pick and place a cartridge
Cycle an axis
Cycle a solenoid page 129
page 130
page 131
page 131
Issue tape drive commands –
Clean a tape drive
Unload a tape drive page 132
page 133
Calibrate the library and tape drive(s) page 134
Reset the library and tape drive(s) page 136
To Perform this Task... See...