FR
EN
NL
www.ewt-france.com
www.ewt-france.com
12
SPECIFICATIONS
Model
ZEPHYR
LED screen
Yes : touch control
Modes
4 (Normal, Natural,
Night, Child Security)
Temperature display
Yes
Ionic technology
Yes
Remote control tidy
Yes
Aroma diffuser case
Yes
Speed number
3
Oscillation
Yes : automatic
SMART tilting
Yes : manual
Handle
Yes
Timer
12H
Remote control
Yes – (Included batteries – CR2025)
Power
45W
Voltage
220-240V~
Frequency
50HZ
Product dimensions (LxWxH)
L31 x W31 x H107,5
Product weight
4,30kg
ASSEMBLY
The stand (4 and 5) for the upright comes in two parts which
can be very easily fitted around the base of the appliance.
One part of the stand (4) should be placed on the front of the
appliance base and the second section of the stand (5) - the
one with the opening on the outside for the electrical cable
(6) - should be placed at the back.
STEP 1 :
Firstly, attach the front part of the stand (4), making sure that
the electrical cable (6) goes through the central opening of
the stand. Line up the holes into which the fastening screws
will be inserted on the stand above the base of the upright.
STEP 2 :
Secondly, slot the back section of the stand (5) into the front
section of the stand (4). Tighten the four fastening screws
(7) firmly.
Ensure that the electrical cable (6) goes through the central
hole in the stand and that it goes through the opening at the
back of the stand when the appliance is placed upright on a
flat floor.
INSTRUCTION FOR USE
1. Please read these instructions carefully before using the
appliance and keep them in case of future use.
2. Make sure that the voltage of your local electricity network
corresponds to the one which appears on the appliance.
3. Before using it for the first time, remove the appliance’s
protective tabs and stickers.
Place your appliance on a flat floor and plug the appliance
into the electrical supply (220-240V, 50Hz) using the electrical
cable.
You can control your appliance by using the touchscreen
control panel (1) located at the top of the stand or by using
the remote control.
The LED display screen can be temporarily switched off by
pressing the LED screen On/Off button (F) on the remote
control or by pressing the ventilation speed control button (E)
for more than 3 seconds on the control panel.
A. Appliance On/Off
B.Ventilation mode control
C.Oscillation On/Off
D.Timer
E.Ventilation speed control
F. LED screen On/Off
G. Ionic function On/Off
Appliance On/Off (A)
Switch the appliance on by pressing the button and switch it
off by pressing the button a second time.
M Ventilation mode control (B)
Normal Mode: The indicator
will light up when Normal
Mode is switched on.
When the appliance is switched on, the ventilation mode will
be set to Normal mode by default. The ventilation speed will
be regular according to the speed selected.
Natural Mode: The indicator
will light up when Natural
Mode is switched on.
When this mode is switched on, the appliance will alternate
between the different ventilation speeds - Fast, Medium, Low
- for periods of 15 seconds for each speed.
Night Mode: The indicator
will light up when Night
Mode is switched on.
When this mode is selected and the appliance is set to Fast
speed, the appliance will remain at this speed then switch to
Medium speed before finishing on Low speed. Each of these
stages will last for 30 minutes. The appliance will therefore
stop functioning after 1 hour and 30 mins when set to Night
mode on Fast speed, 1 hour when set to Medium speed and
30 minutes when set to Low speed.
When this mode is activated, you can deactivate oscillation
by pressing the button (C) while leaving Child mode on.
Child Mode: The indicator
will light up when Child
Mode is switched on.
The timer will be automatically programmed to stop after
3 hours and will automatically activate oscillation of the
appliance. The appliance will activate a ventilation speed
cycle by setting to Fast speed, Medium speed then Low
speed, each for a period of 15 minutes.
Oscillation On/Off (C)
Press the button once to begin oscillation then press it a
second time to stop oscillation of the appliance.
The ventilation direction of the appliance can be adjusted
manually. To incline the appliance, simply push the top of the
appliance backwards. The angle of incline is adjustible up to
around 7°. To put the appliance back into a verticle position,
simply push the top of the appliance forwards.
Timer (D)
The appliance is equipped with a timer, allowing you to
programme the length of time ventilation will last for between
1 and 12 hours. When you press the button once, the timer
will be set to stop the appliance after 1 hour.
Every time you press the button, 1 hour will be added.
In order to deactivate the timer, keep pressing the button until
Zephyr.indd 12
26/11/18//48 12:26
