EWT ZEPHYR CARBON, User Manual

Page: 10 / 20

FR EN DE
10
SPECIFICATIONS
Model Zephyr Carbon
LED screen Yes : touch control
Modes 4 (Normal, Natural,
Night, Child Security)
Temperature display Yes
Ionic technology Yes
Remote control tidy Yes
Aroma diffuser case Yes
Speed number 3
Oscillation Yes : automatic
SMART tilting Yes : manual
Handle Yes
Timer 12H
Remote control Yes – (Included batteries – CR2025)
Power 45W
Voltage 220-240V~
Frequency 50HZ
Product dimensions (LxWxH) L31 x W31 x H107,5
Product weight 4,30kg
ASSEMBLY
The stand (4 and 5) for the upright comes in two parts which
can be very easily fitted around the base of the appliance.
One part of the stand (4) should be placed on the front of the
appliance base and the second section of the stand (5) - the
one with the opening on the outside for the electrical cable
(6) - should be placed at the back.
STEP 1 :
Firstly, attach the front part of the stand (4), making sure that
the electrical cable (6) goes through the central opening of
the stand. Line up the holes into which the fastening screws
will be inserted on the stand above the base of the upright.
STEP 2 :
Secondly, slot the back section of the stand (5) into the front
section of the stand (4). Tighten the four fastening screws
(7) firmly.
Ensure that the electrical cable (6) goes through the central
hole in the stand and that it goes through the opening at the
back of the stand when the appliance is placed upright on a
flat floor.
INSTRUCTION FOR USE
1. Please read these instructions carefully before using the
appliance and keep them in case of future use.
2. Make sure that the voltage of your local electricity network
corresponds to the one which appears on the appliance.
3. Before using it for the first time, remove the appliance’s
protective tabs and stickers.
Place your appliance on a flat floor and plug the appliance
into the electrical supply (220-240V, 50Hz) using the
electrical cable.
You can control your appliance by using the touchscreen
control panel (1) located at the top of the stand or by using
the remote control.
The LED display screen can be temporarily switched off by
pressing the LED screen On/Off button (F) on the remote
control or by pressing the ventilation speed control button
(E) for more than 3 seconds on the control panel.
A. Appliance On/Off
B.Ventilation mode control
C.Oscillation On/Off
D.Timer
E.Ventilation speed control
F. LED screen On/Off
G. Ionic function On/Off
Zephyr DE_A4.indd 10 7/11/19 10:04