
FR
EN
41
evacuated
AUTO-ECO automatic speed: the appliance will automatically adjust ventilation speed according to the temperature
humidity.
The fan speed will remain low while the temperature and humidity level of the room will only change gradually to guarantee
In AIR-CONDITIONER mode, the selected temperature will increase by 1°C per hour over a period of 2 hours. This new
PROGRAMMING
Setting the timer
This timer can be used to set the appliance to switch on or off at a chosen time. This will allow you save on power consumption
by optimising the periods when it is in use.
Setting the appliance to switch on
• Switch the appliance on.
• Choose the mode you want to use, such as AIR-CONDITIONER mode set to 24°C at maximum fan speed, for example.
• Then switch the appliance off.
• Press the
button. The screen will display 1-24 hours and the
,
and
will flash together (Fig. 7).
• Press several times until amount of time you want is displayed. Wait for around 5 seconds, then the timer will be
activated and only the
symbol will be displayed on the screen (Fig. 8).
• To cancel the programme that has been set, press the button
again or press the
button. The
symbol will
disappear from the screen.
Fig. 7
Fig. 8
Setting the appliance to switch off
• When the appliance is operating, press the
button. The screen will display 1-24 hours and the
,
and
symbols
will flash together (Fig. 9)
• Press the button several times until the time you want is displayed. Wait for around 5 seconds, then the timer will be
activated and only the
symbol will be displayed on the screen (Fig. 10).
• To cancel the programme, press the
button again or press the
button. The
symbol will disappear from the
screen.
Fig. 11
Fig. 9
Fig. 10
CHANGE UNIT OF TEMPERATURE
When the appliance is in standby mode, press the button for 20 seconds. You can then change the unit of temperature.
Fig. 12
Fig. 13
Before modification, in Cold mode, the screen will appear as in Fig. 12.
After modification, in Cold mode, the screen will appear as in Fig. 13.
Manual_Snowair9HE-12HE_2020.indd 41
Manual_Snowair9HE-12HE_2020.indd 41
13/11/20 08:19
13/11/20 08:19