FR
EN
36
LOCATION
The unit must be placed on a stable area of floor to minimise noise and vibrations. Place the unit on a flat area of floor
which is level and sufficiently strong to take the weight of the unit. This will ensure that the unit is in a safe location for it to
operate.
•
The unit has wheels, so it can be moved around easily, but it can only be moved on smooth and flat surfaces. Take care
when moving it across carpet. Take precautions and use appropriate protection when moving it across a wooden floor.
Do not try to make the unit roll over any objects.
•
The unit must be plugged into a power socket that is earthed correctly.
•
Never place any obstacles in the way of the unit’s air intake and outlet.
•
Maintain a space of at least 45cm between the unit and any walls to allow air to circulate correctly.
•
The tube can be fully unfolded but it is advisable only to unfold it to the minimum required length with no slack.
•
Please ensure that the tube is not bent at any sharp angles and that no sections of it sag downwards.
INSTRUCTION FOR USE
BEFORE USING THE APPLIANCE FOR THE FIRST TIME :
1. Please read these instructions carefully before using the appliance and keep them in case of future use.
2. Make sure that the voltage of your local electricity network corresponds to the one which appears on the appliance.
3. Before using it for the first time, remove the appliance’s protective tabs and stickers.
LED DISPLAY
A. Air conditioning mode
B. Speed indicator
C. Runback timer
D. Temperature symbol
E. Temperature indicator
REMOTE CONTROL
CONTROL PANEL
The control panel on the top of the appliance with its touchscreen function allows you to manage the appliance’s functions
without using the remote control. However, you will need the remote control to access the full range of the appliance’s
functions
temperature (°C or °F).
APPLIANCE ON/OFF
Plug the cable of the appliance into the socket to switch on standby mode.
Press the
button to switch the appliance on. The function set to start up will be the one in use when the appliance was
last switched off.
Never switch the appliance off by unplugging it from the power socket. Always press the
button then wait a few minutes
before unplugging the appliance. This will allow the appliance to carry out a series of automatic checks prior to switching
off.
Manual_Snowair9HE-12HE_2020.indd 36
Manual_Snowair9HE-12HE_2020.indd 36
13/11/20 08:19
13/11/20 08:19