Chapter 2
Safety, Environmental & Regulatory Information
2.6. Field Implementation & Environmental Conditions
2.6.1. Ingress Protection
The eWON Flexy Base Units have an IP20 protection grade. Therefore, the eWON Flexy Base
Units are NOT suited for outdoor mounting. They have to be integrated in an electrical
cabinet, protected from excessive heat, humidity and dust. Do not push any sharp object
into the air vents or openings of the equipment.
2.6.2. Mounting Recommendations
The normal mounting position of the eWON Flexy is wall mounted on a horizontal
•
Mounting the unit on DIN-rail
Present the unit in front of the DIN rail and tilt it upwards in order to hang it on the
upper edge of the DIN rail by the hooks at the rear. Gently tilt the unit downwards
until the slide lock snaps. The slide lock is located in the middle at the bottom of the
unit (see §
).
•
Removing the unit from DIN-rail
Insert a medium size screwdriver in the small slot of the slide lock located in the
middle at the bottom of the unit. Release the unit by pulling the slide lock downwards
while gently tilting the unit upwards. Free the unit by unhooking it from the upper rail
edge (see
).
To ensure a proper ventilation of the equipment, a free gap of at least 2 cm must be
respected in front of all ventilation openings of the unit:
Page 12 / 40
eWON Flexy - Base Units | IG 014
