Machine description
– quick overview
Machine control
– Operating elements
24
099-005431-EW501
04.02.2016
4.4
Machine control
– Operating elements
Figure 4-4
Item Symbol
Description
0
1
Functional sequence - See 4.4.1 Functional sequence chapter
2
Push-button, welding task selection (JOB)
Select the welding task using the welding task list (JOB-LIST) (not applicable for
Phoenix Expert). The list can be found inside the protective cap of the wire feed
mechanism and in the appendix to these operating instructions.
3
Display, left
Welding current, material thickness, wire speed, hold values
4
Push-button, parameter selection left/power-saving mode
AMP ----- Welding current
------- Material thickness
------- Wire feed speed
Hold ----- After welding, the values used last are shown from the main program. The
signal light is illuminated.
STBY --- Press for 2 s to put machine into power-saving mode.
To reactivate, activate one of the operating elements.
5
Display, JOB
Shows the currently selected welding task (JOB number).
6
Welding parameter setting, rotary dial
For setting the welding performance, for selecting the JOB (welding task) and for
setting other welding parameters.
