Design and function
TIG welding
099-000188-EW501
22.02.2016
29
5.8.3
Welding task selection
The welding task is selected using the buttons on the machine control on the welding machine.
Signal lights (LED) display the welding parameter selection.
Set the welding task in the following order:
Item Symbol
Description
0
1
Welding procedure push-button
-------- MMA welding
-------- TIG welding
2
Welding current potential push-button
-------- DC welding with negative polarity at the torch (or electrode holder) with
respect to the workpiece.
----- AC welding (alternating current waveform can be set)
3
Operating mode/power-saving mode push-button
-------- Non-latched
------ Latched
Press for 2 s to put the machine into power-saving mode. To reactivate, activate one of
the operating elements.
4
Select welding parameters button
This button is used to select the welding parameters depending on the welding process
and operating mode used.
5
Pulse welding push-button (average value pulses)
6
Welding parameter setting rotary dial
Setting currents, times and parameters.
