Design and function
Machine configuration menu
50
099-005545-EW501
17.12.2020
5.4.7 Arc ignition
5.4.7.1 Liftarc
Figure 5-36
The arc ignites through contact with the workpiece:
a) Carefully place the torch gas nozzle and tungsten electrode tip against the workpiece (lift arc current
flows independent of the set main current)
b) Angle the torch above the torch gas nozzle until the distance between electrode tip and workpiece is
approx. 2–3 mm (arc ignites, current increases to the set main current).
c) Lift the torch off and bring into normal position.
Complete the welding task: Remove the torch from the workpiece so that the arc extinguishes.
5.5 Machine configuration menu
5.5.1 Selecting, changing and saving parameters
B
l
0
+
A
A
A
B
B
B
B
B
A
A
B
A
B
A
Figure 5-37
Display
Setting/selection
Calibration
The machine will be calibrated for approx 2 seconds each time it is switched on.
Exit the menu
Exit
Machine configuration
Settings for machine functions and parameter display
