Design and function
Advanced settings
099-002032-EW501
29.04.2010
35
5.8.2
Activating the welding current actual value display
The welding current can be displayed as a setpoint value or an actual value on the welding data display.
The factory setting is that the welding current is displayed as a setpoint value (parameter "rcd" = off).
After switching over to the actual value display (parameter "rcd" = on), the following is displayed:
• The setpoint value is displayed in open circuit mode (when no welding current is flowing)
• If welding current is flowing, the welding data display switches over to the actual value
• After welding, the setpoint value is displayed once more
Figure 5-14
Display Setting/selection
Power display switching
on Actual
value
display
off
Setpoint value display (factory setting)
