Functional characteristics
Machine control – Operating elements
16
Item No.: 099-004998-EWM01
5.1.2
Wire feed machine control
Figure 5-2
Item Symbol Description
0
1
“Wire speed” rotary dial
In conventional operation, infinite setting of the wire speed from 0.5 to 20m/min.
(welding performance one-dial operation).
No function in application-specific operation (factory setting)
“Select operating mode” button
Non-latched
Latched
Special, non-latched
2
Special, latched
3
Earth fault signal light
Safety shut-down, see “Troubleshooting, causes and remedies” chapter
“Welding process” button
MIG/MAG standard welding
4
MIG/MAG pulse arc welding (EXPERT PULS only)
5
Arc length correction rotary dial
6
“Dynamic correction/choke effect” rotary switch
In conventional operation, dynamics correction or choke effect in nine stages from hard
and narrow arc to soft, wide arc.
No function in application-specific operation (factory setting).
