Quick overview
Machine display
099-00L104-EW501
17.01.2022
17
4.3.2 Main screen
The main screen shows all the information relevant for the welding process before, while and after it is
carried out. In addition, it shows status information on the machine state. The assignment of the context-
dependent push-buttons is also shown on the main screen.
The user can choose between different main screens
> see 4.3.3 chapter
.
4.3.2.1 Actual values
Figure 4-2
Item Symbol Description
0
1
Information on the welding task selected
JOB number.
2
Display area for welding data
Welding current and voltage, current status of the welding sequence.
3
Display area for process parameters
Wire feed speed, operating mode etc.
4
Display area for system status
Network status, error status etc.
> see 4.2 chapter
4.3.2.2 Nominal values
Figure 4-3
Item Symbol Description
0
1
Information on the welding task selected
JOB number.
2
Display area for process parameters
Wire feed speed, operating mode etc.
3
Process parameter setting range
Operating mode, voltage correction, program, welding type etc.
4
Display area for system status
Network status, error status etc.
> see 4.2 chapter
4.3.3 Main screen variants
Main screen type 1
Main screen type 2
