Functional characteristics
Switching on and system diagnosis
Item No.: 099-008088-EWM01
13
5.2.2.4
Changing over between standard MIG welding and pulse arc MIG welding
Operating
element
Action Result
Display
3 s
Select setting option
Pul / Nor?
n x
Select program
Px: _Nor
Changeover
^Pul
MIG pulse arc welding
m/min
_Nor
Standard MIG welding
Confirm and save change
Px: ^Pul
5.2.2.5
Operating point setting changeover via wire feed speed or panel thickness
• The operating point in program 0 can also be set via the panel thickness parameter.
Operating
element
Action Result
Display
Switch off the welding machine.
+
+
Hold down "Mode" button on the remote control,
switching on the welding machine.
PROGRAMME: 0XX
Press "Mode" button once
DV
Operating point setting changeover via wire
speed or panel thickness.
DV
Wire speed
th/mm
Panel thickness
th/mm
Switch off the welding machine and restart in
order to put the change into effect.
5.3
Switching on and system diagnosis
5.3.1
R40 manual remote control
The remote control runs through a system diagnostics process on being switched on. The following
values are displayed.
•
PHOENIX R40,001
(Type and initialisation status)
•
SV: 00.00.00.XX
(Software version)
The current values for the welding voltage and current are then displayed.
•
U: 0.0V I: 0A
