CONV Pelco To Bosch - firmware 0.01.xx
Ewimar Sp. z o.o.
www.ewimar.pl
Made in Poland
The converter / translator is a microprocessor device designed to integrate control devices using
the Pelco-D or Pelco-D protocol with Bosch Speed Dome cameras operating in the Biphase or OSRD
protocols.
High performance processor and software created in accordance with the principles of
multitasking, give an efficient configuration with fast response to control.
The converter / translator is equipped with one RS-485 port for Pelco protocol and two
configurable ports for Biphase / RS-485 OSRD.
Main features
1) Support for up to
sixteen
cameras (
Standard version
) by one converter with individually selected
addresses for each camera in the range from 1-254.
One
camera support for
Lite
version.
2) Possibility to extend up to 99 cameras by purchasing additional licenses. Function of changing
camera output addresses (
ADDRESS SHIFT
) during translation. It also allows you to control Bosch
cameras with an address range of 1-16383. Optional license for the Standard version, free for the
Lite version.
3) Advanced PAN / TILT
Joystick Curve Correction
function, individually for each camera - optional
license for the Standard version, free for the Lite version.
4) Simultaneous processing of many motion commands: Pan, Tilt, Zoom, Iris, Focus.
5) Programming and calling the PRESET and AUX functions.
6) Wide range of baud rate selection and Pelco and Bosch OSRD protocol type selection.
7)
Settings and updating firmware via USB and
Ewimar Firmware Upgrader / Configurator
.
8)
Possibility to change the firmware to others when the converter will no longer be used in the existing
system - only at the cost of the software.
Connection structure
The converter has two Bosch output ports, each of which is freely configurable as Biphase or OSRD
(RS-485). It is installed between a control device with Pelco protocol (keyboard, DVR, encoder, etc.) and
Bosch cameras. Can be located anywhere between control device and PTZ cameras..
PORT 1 / RS485
PORT 3
PTZ keyboard with
Pelco
Bosch Speed
Dome
PORT 2
Biphase / OSRD
Biphase / OSRD
Pelco
Speed Dome
Pelco->Bosch
The basic way to connect a Pelco PTZ keyboard to Bosch Speed Dome cameras
CONV
AG
Pelco To Bosch
PTZ protocol converter / translator
USER GUIDE firmware 0.01.xx Standard and Lite version
