13
3.0 In sta llation – gen eral re c o m m en dation s
13
3.0 Installation – general
recommendations
3.1 Important notes
DANGER
Some components integrated into the Ewellix scope of supply
are “products bought on catalogue”. This means that the design
and manufacturing of these components haven’t been done by
Ewellix.
For all these “products bought on catalogue”, it’s the user’s
responsibility to read the associated manufacturer’s user manual
before starting to install or to use the product.
WARNING
Risk of serious or fatal injuries by crushing because of
vertical load fall.
Do not use the brake (of the motor or an additional brake) to hold
a vertical load while an operator is under the load. Generally,
the holding torque of the brake is created by means of friction
discs and does not provide a positive lock. In any event, lock the
vertical load in position by another means or move and stop the
vertical load at the bottom position which is safe.
WARNING
Risk of serious or fatal injuries by crushing because of
unintentional cylinder start-up.
Before starting any work on actuator, isolate the motor, brake
and fan (if installed) from the power supply and safeguard them
using lockout/tagout procedures against unintentional re-start.
WARNING
During operation, the cylinder surface temperature can reach
high values. There is a risk of burns or fire. Before any work on
the actuator, let it cool down.
3.2 Mechanical
installation
3.2.1 Cylinder dimensions – Cylinder
drawing
To know the cylinder dimensions and the definition of its at-
tachments, please look at cylinder drawing. The definition of
drawing cylinder is given in paragraph ⮑ 2.3 Detailed
description of supplied product, page 9.
Summary of Contents for SLSA Series
Page 2: ......
