9
2 .0 G en eral n otes
9
2.8 Electrical safety
NOTE
Declaration of EMC (Electro Magnetic Compatibility) of the linear
motor for CLSM-150-L…A is provided, if needed.
DANGER
The plug and socket connections of motor and encoder must
never be separated or connected under voltage! Disconnecting
the motor plug is permissible only after switching off the power
output module of the servo amplifier and discharging of the
intermediate circuit down to below 40 V. The time for discharging
of the intermediate circuit depends on the servo amplifier used
and the connected load and can be gathered from the relevant
documentation. As a rule, a discharging period of 5 minutes can
be considered sufficient.
2.9 Disclaimer of liability
When the safety advice in this manual is not observed, this
can endanger persons, the environment and machinery.
The manufacturer assumes no liability for unauthorized
modifications to the CLSM Linear module., nor for improper
installation, start-up, maintenance and repairs as well as un-
authorized use or improper operation of the CLSM Linear
module.
Only original replacement and expandable parts from
Ewellix and SIEMENS are approved and should be used
without exception.
The use of other parts may result in increased hazards.