8
EVM Solutions (Pty) Ltd 210 Main Street, Somerset West, Western Cape, South Africa, 7130
Support : 07 28 42 42 82
www.evx.co.za
Document Number: 200-2022-301-3
Charging
the
Battery
The EVx e-Scooter’s comes with a high-capacity Lithium Ion rechargeable battery. The
battery needs to be fully charged before your first use. The intelligent charger that came with
your e-Scooter will control the battery pack charging and will automatically end charging
when the battery is fully charged. Make sure your battery is fully charged before you go on a
long trip.
The battery can be charged on your e-Scooter or you can remove it from the e-Scooter to
charge it at a convenient location inside your house or at a charging station (See Removing
Battery pack later in this document)
Be sure to always use
only
the
charger
supplied with the product. (Using another charger
may void your battery warranty)
The charger must be plugged into a 220/230 50 Hz AC supply. (The ordinary power outlet
available in a South African home)
Charging
the
battery
whilst
installed
in
your
e
‐
Scooter
Figure
1:
Location
of
onboard
Charge
Point
Preparation
for
onboard
charging:
Make Sure the e-Scooter is turned off.
Stand on the left side and locate the charge port cover on the bottom of the
battery pack.
Lift the rubber dust cap away to expose the DC charge connection port.
Carefully, plug the charger into the charger port as described below.
3.PREPERATION FOR FIRST USE
