Installation Manual MK-Series
3/24
1.
Please read these instructions prior to use.
2.
Please keep these instructions accessible.
3.
Please heed all warnings.
4.
Please follow all instructions.
5.
Installation should be done only by qualified personnel and conform to all local
codes.
CAUTION: These servicing instructions are for use by qualified service personnel
only.
To reduce the risk of electric shock, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so.
6.
Use only mounting methods and materials capable of supporting at least four times the
combined weight of the pan-tilt unit, mounted payloads, and cabling.
7.
For outdoor use, use only corrosion resistant hardware to fasten the mount and
payloads (e.g., stainless steel screws).
8.
The unit should not be installed in environments that present conditions beyond
the environmental specification of pan-tilt unit. Installation near heat sources such
as radiators, heat registers, stoves, or other apparatus (including amplifiers) can
exceed the unit’s temperature ratings.
9.
Refer all servicing to qualified service personnel. If the unit is damaged, remove power
immediately, and contact ELR.
10.
A readily accessible power disconnect shall be incorporated into the installation wiring.
11.
Only use replacement parts recommended by ELR.