EVVA EMZY, System Manual

Page: 14 / 16

13
The inputs can also be tested in advance.
Step-by-step instructions with screenshots can be found on the EMZY website in the download
area:
https://www.evva.com/emzy/
Manual Settings
Various settings can be entered here and the configurations of the EMZY thumbturn can also be
saved and loaded into other EMZY thumbturns.
Motor thumbturn parameters
The signalling intensity can be set and switched on or off under this menu item.
Furthermore, permanent latch retraction can be set in office mode.
Motor thumbturn inputs
As during commissioning, inputs can be configured retrospectively here. The integrated
thumbturn button can be deactivated or operated as an intelligent thumbturn button. The
intelligent thumbturn button acts as an operating mode switch and switches after the preset
time to the other mode.
I/O box inputs
Various I/O box inputs can be set and updated here for simple commissioning.
I/O box outputs
Various alarms can be sent to third-party systems via up to 3 outputs.
Office mode alarm statuses
Different alarm states can be selected, e.g. relating to tampering or if the door is not properly
closed.