State of the Art EVSE
User Manual
Model 3727-A02XX EVSE Gateway
Copyright EVSE LLC 2017. All rights reserved. Patents pending.
Page 5
Instructions Pertaining To Risk of Fire or Electrical Shock
The following is a summary of safety concerns relevant to the installation and use of the Model 3727-200 Gateway
Module. Failure to follow these safety instructions may lead to serious injury, death and/or damage to the equipment.
WARNING:
is used to provide a warning of hazardous voltage and possibility of electric shock.
CAUTION:
is used to provide awareness of important safety information in these instructions.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
Only qualified personnel should perform the installation. This installation must be performed in
accordance with all local electrical/building codes and ordinances. Follow lockout/tagout
procedures.
Improper connection of the equipment grounding conductor may result in a risk of electric
shock. Reference National Electrical Code, ANSI/NFPA 70 for proper sizing of the ground
conductor.
CAUTION:
To reduce the risk of fire
when installing the Gateway
, connect only to a dedicated
circuit with 15A maximum branch circuit over
–current protection in accordance with
the National Electrical Code, ANSI/NFPA 70.
To satisfy FCC RF exposure requirements for mobile transmitting devices, a separation
distance of 20 cm or more should be maintained between the antenna(s) of this device
and persons during device operation. To ensure compliance, operations at closer than
this distance is not recommended. The antenna(s) used for this transmitter must not be
co-located in conjunction with any other antenna or transmitter.
Additional considerations which will contribute to safe operation of this unit include the following:
DO:
-
Read all instructions before using this product.
-
The device should be supervised when used around children.
-
In case of a problem, contact your installer or CMI Customer Support.
DON’T: - Use this product if the enclosure is broken, cracked, open or shows any other indication of
damage.
-
Attempt to repair or service the unit yourself.
SAVE THESE INSTRUCTIONS
