State of the Art EVSE
User Manual
Model 3727-A02XX EVSE Gateway
Copyright EVSE LLC 2017. All rights reserved. Patents pending.
Page 10
Lockout/Tagout
Warning:
Disconnect power from service lines
.
Avertissement:
Déconnecter puissance de lignes de service.
Prior to performing electrical wiring for installation of the Gateway, ensure that power has been removed from the service
lines originating from the service panel.
To maintain the safety of all persons in the area, a lockout/tagout procedure should be followed per 29 CFR 1910.147.
Lockout is the placement of a lockout device on the service panel energy isolation device (circuit breaker) to ensure that the
power source cannot be operated until the lockout device is removed. A lockout device utilizes a positive means such as a lock
(key or combination lock with a circuit breaker lockout) to hold the breaker in a safe position to prevent energization.
Tagout is the placement of a tagout device (a tag or other prominent warning device) on an energy isolation device to indicate
that the energy isolation device and the equipment being controlled cannot be operated until the tagout is removed. The
tagout device should be non-reusable, attached by hand, self-locking and non-releasing, with a minimum unlocking strength of
no less than 50 pounds.
The lockout approach shall be used unless the utilization of a tagout procedure will provide full personnel protection.
