EVS XT-3, Hardware Technical Reference Manual

Page: 89 / 126

Model/Product
Number
RU
Gb
ports
Uplinks
JF
switching JF
routing
Stacking Dual PS
Cisco Catalyst
WS-C2960S-48TS-L 1 48 4x1G SFP Y N Y No
Cisco Catalyst
WS-C3750X-24TS 1 24 Optional
module Y Y Y Optional
Cisco Catalyst
WS-C3750X-48TS 1 48 Optional
module Y Y Y Optional
A layer 2 device can be used when all machines are configured to be on the same LAN,
when another layer 3 device is present to do the routing if needed, or when no routing
between VLANs is needed.
The following table gives the list of available uplink modules for the Cisco Catalyst
switches of the WS-C3750X series:
Product Number Description
C3KX-NM-1G Four GbE port network module
C3KX-NM-10G Two 10GbE SFP+ ports and Two SFP ports
network module
C3KX-NM-10GT Two 10GB-T ports network module
Additional Information
HP switches have a lifetime guarantee with next-business-day advance replacement with
no additional contract purchase.
HP switches are not compatible with Cisco's proprietary protocols (ISL, PagP, PVST,
etc.) which could be a problem for integration in some legacy Cisco environment.
However, such a case is quite unlikely to arise and most of the time workarounds can be
found.
The stacking possibilities of the Cisco 3750X series permit to have fully active LACP
teams for redundancy to the hosts.
5.8. GPIO Connections
5.8.1. GP In Connections
GPI Triggers
The allocation of the XT3 server GPI triggers is performed in the Multicam Configuration
window, in the GPI tab. See the Configuration manual for detailed information on
allocating GPI triggers.
HARDWARE TECHNICAL REFERENCE MANUAL XT3 Server 12.05
5. Hardware Installation and Cabling 79