EVS Synapse MGG200 Installation And Operation Manual Download

Page: 37 / 68

5.6.

Input Status Tab

The Input Status tab displays the current status of all inputs and a log of monitoring events.

1. Input Status

Format

: This status item indicates the presence, format and frame rate of the signal in inputs 1-8. This is

displayed as:

•

1080p60

•

720p60

•

1080i60

•

1080p50

•

720p50

•

1080i50

•

1080p30

•

1080p25

•

SD625

•

1080p24

•

SD525

CRC/EDH

: This item indicates CRC and EDH errors on the corresponding input. Can be: OK, Error or NA.

Mapping

: This indicates the mapping of the 3Gb/s input signal. Can be: Level A, Level B-DL, Level B-DS,

Level B-DSSC, PsF or NA.

: Displays the detected VI value found in the inputs when they are SD. This is displayed as 4:3_0

through 4:3_7, 16:9_0 through 16:9_7 or NA (when no extended VI is detected).

WSS Stnd

: This status item displays the detected standard WSS value of the inputs when they are SD.

This is displayed as 1_vid through 8_vid, 1_flm through 8_flm or NA (when no standard WSS is detected).

INSTALLATION AND OPERATION MANUAL

Synapse MGU100 - MGG100 | 5. Graphical User Interface |

Summary of Contents for Synapse MGG200





































































Search results

Summary of Contents for Synapse MGG200

Reviews:

Related manuals for Synapse MGG200

Brands by name

Popular brands

EVS Synapse MGG200, Installation And Operation Manual

Search results

Summary of Contents for Synapse MGG200

Reviews:

Related manuals for Synapse MGG200

Brands by name

Popular brands