manualshive.com logo in svg

EVS Synapse GDK200, Installation And Operation Manual, Page: 26 / 56

Share
Download
EVS Synapse GDK200 Installation And Operation Manual Download Page 26

Pgrm-Key1-Ctrl

With this item you select how the Prgm-Key1 setting is
controlled: Manually (manual) or via GPI-triggers (GPI-A, GPI-
B or GPI-C). By default it is set to Manual.

The GPI pools (GPI-A, GPI-B and GPI-C) are defined with the
settings under the header GPI-MODE. Refer to "GPIs
Explained" for a detailed description of the GPI pool
functionality.

Prgm-Key1

This item sets the key1 on or off for the program outputs. Set
to GPI will enable the program keyer 1 to be switched on or off
by GPI-0 closures (please refer to "Connector Panels").
Default is On.

Prgm-Key1-Fill

With this item you select an input which should function as the
fill input for program key 1. Can be SDI-1, SDI-2, SDI-3 or SDI4.
Default is SDI-1.

Prgm-Key1-Key

With this item you select an input which should function as the
key input for program key 1. Can be SDI-1, SDI-2, SDI-3 or
SDI4. Default is SDI-1.

Prgm_Key1_In

With this setting you can select how long the fade in of the
program-key1 should be when a new key is triggered. This
can be between 0 frames and 200 frames. Default is 0 frames.

Prgm_Key1_Out

With this setting you can select how long the fade out of the
program-key1 should be when a new key is triggered. This
can be between 0 frames and 200 frames. Default is 0 frames.

Prgrm-Key1-Transp

With this setting you can increase or decrease the
transparency of the fill image of program key 1. Can be set
between 0% and 199%. Default is 100%. The following graph
shows how the transparency setting modifies the key (with
Keyer set to Key_input).

18

 | November 2021 | Issue 1.00.B

Summary of Contents for Synapse GDK200

























































Reviews:

No comments