EVS Synapse GDK200, Installation And Operation Manual, Page: 25 / 56

Wipe-Pos-Prgm With this setting you set the manual position of the wipe in the program output. This
is only used when Wipe-Ctrl is set to manual.
Wipe-Pos-Prev With this setting you set the manual position of the wipe in the preview output. This
is only used when Wipe-Ctrl is set to manual.
Audio_Type With this setting you select an audio transition type for the mix you are triggering
(both program and preview). Possible audio transition types are:
• Fade-out_Fade-in (default)
• Cross_fade
• No_Fade
Audio_A Selects the source of the audio for the start of the mix. Can be SDI or Add-on.
Default is SDI.
Audio_B Selects the source of the audio for the end of the mix. Can be SDI or Add-on.
Default is SDI.
Trans_Speed With this setting you select a level of speed for the transition. This works in a preset
way. You can define the exact speed of the possible settings (slow, medium or fast)
with the following settings.
Trans-Fast This defines the speed of the Fast setting for the Trans_Speed menu item. Can be
any value between 1 and 400 frames. Default is 50 frames.
Trans-Medium This defines the speed of the Medium setting for the Trans_Speed menu item. Can
be any value between 1 and 400 frames. Default is 100 frames.
Trans-Slow This defines the speed of the Slow setting for the Trans_Speed menu item. Can be
any value between 1 and 400 frames. Default is 200 frames.
5.5. Keyer Options
Setting Description
Keyer With this setting you decide how you want the keyer to work.
Choices are:
• Key_input: Use the key as inserted on the key-input.
• Self_key: Key using the signal from the fill input, without
making use of a key-input (hard keying).
• Key_invert: Use the key as inserted on the key-input, but
inverted.
• Forces_shape: This mode will only fade down the
background with the corresponding key level and will
insert the fill signal without changing this at all.
INSTALLATION AND OPERATION MANUAL
Synapse GDK200 | 5. Settings Menu | 17