EVS DYVI Hardware Technical Reference Manual Download Page 42

Page: 42 / 102

EVS Broadcast Equipment SA

Issue 2.0.7.2 September 2021

Processing Module Installation and Cabling

Video Input/Output Standards

•

1080p50/59.94

•

1080i50/59.94

•

720p50/59.94.

Analog Reference Input (Ref)

•

SMPTE-170M / SMPTE-318M / ITU624-4 (Black Burst)

•

SMPTE-274M / SMPTE-296M (Tri Level Sync)

Note

The Ref Signal applied must match the system’s video
reference configuration.

Connector Type

HD-BNC

Processing Module 32×16 SDI Configuration

The Processing Module 32×16 is equipped with 4 SDI-IO boards.

This provides:

•

32 SDI inputs

•

16 SDI outputs

•

1 analog output reference.

Note

•

The Sync Output (Located on Card 2) should be connected
to the GPU Sync Card). The other Ref Out connectors
should not be used.

Summary of Contents for DYVI







































































































Search results

Summary of Contents for DYVI

Reviews:

Related manuals for DYVI

Brands by name

Popular brands

EVS DYVI, Hardware Technical Reference Manual

Search results

Summary of Contents for DYVI

Reviews:

Related manuals for DYVI

Brands by name

Popular brands