10
5.
When the cut is complete release the switch trigger.Do not set the saw down until the blade
stops running.
Cleaning and maintenance
Before performing any work on the equipment, pull the power plug.
Cleaning
•
Regularly clean the machine housing with a soft cloth, preferably after each use.If the dirt
does not come off use a soft cloth moistened with soapy water.
•
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Maintenance
Our machines have been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper machine care and regular
cleaning.
Technical data
Voltage/Frequency
220-240V ~ 50Hz
Input power
1400W
No load speed
5.000 rpm
Saw blade diameter
185 mm
Max sawing depth at 90°
63,5 mm
Max sawing depth at 45°
43 mm
Sound power
LwA= 98dB(A)
Vibration level
2,320m/s
²
Weight
6,25 kg
Storage
•
Thoroughly clean the whole machine and its accessories.
•
Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
•
Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
•
Don
’t keep it in plastic bags to avoid humidity build-up.
Warranty
This warranty covers all material or production flaws excluding:
•
Damage or defects resulting from maltreatment, accidents or alterations; nor the
transportation cost
•
Defective parts subject to normal wear and tear such, brushes or circular disk vidia, etc .;
•
We disclaim all liability for any bodily injury resulting from inappropriate use of the tool.
•
Definitely excluded from the warranty is damage resulting from fluid permeation, excessive
dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate
usage, incompetent usage (e.g. not following the instructions given in the manual), inexpert
assembly, lightning strike, erroneus net voltage. This list is not exhaustive.
