6
Assembly
WARNING! IN case of any abnormal noise, immediately turn off the tool and contact an
authorized service facility for repairs
WARNING! To avoid product damage and loss of warranty, start the engine under load is
prohibited.
Installation in working position
Install the product on the table or worktop with screws, nuts and washers provided.
Switching ON and OFF
Connect the tool to the power supply.
To start the household, press the switch (3) .To stop release switch (3).
Before you start grinding, let th emachine to run empty at idle speed about 1 minute.
Grinding
Install the right sieve (7) according to the desired size of the ground product.
Attach a bag to collect ground product
Remove foreign solid objects from grain and fill the funnel with grain
Regulate the grain feeding by using the slider (5)
Switch off the household only after processing all grain from the tray, gate closing and complete grain
processing in the chamber.
Cleaning and maintenance
Before performing any work on the equipment, pull the power plug.
Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.If the dirt does not come
off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Maintenance
Our machines have been designed to operate over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper machine care and regular cleaning.
Storage
Thoroughly clean the whole machine and its accessories.
Store it out of the reach of children, in a stable and secure position, in a cool and dry
place, avoid too high and too low temperatures.
Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
Don
’t keep it in plastic bags to avoid humidity build-up.
