12
Adjusting the cutting angle
The product can be rotated around the base plate (8) for max 45
⁰
. For setting the angle, loose the
base angle adjusting screw (9) and set the desired angle. Tighten the base angle adjusting screw
(9).
Dust exhaust
For keeping the work area clean, you have the possibility of connecting a vacuum cleaner using
the dust exhaust connector (5).
Operation
WARNING! In case of any abnormal noise, immediately turn off the tool and
contact an authorized service facility for repairs
Before starting the tool, check if the blade is correctly installed.
Switching ON and OFF
Connect the battery. The battery must be charged before switching on the product.
To start the machine, you squeeze the ON / OFF switch (2) while pressing on the lock button (1).
To stop the machine, you release the ON / OFF switch (2).
Cutting
WARNING! Before starting the cutting process, check if the blade is correctly
installed.
WARNING! Start the cutting process only after the blade reaches the proper
speed. Never start cutting by placing the stopped blade in contact with the
workpiece. There is risk of harming the user.
WARNING! Secure properly the workpiece before starting the cutting process.
Never use your hand to fix the workpiece or place your hand under the
workpiece.
WARNING! While working, keep the tool under control using both handles.
Start the tool and, after the blade reaches the proper speed, begin the cutting process applying a
moderate pressure on tool. Keep the speed constant until the cutting process is finished.
After finishing the cut, release the on/off switch (2) and wait for the blade to stop completely
before releasing the tool or making any other intervention on it.
WARNING! After use, the blade could be very hot. Do not touch the blade until it
cools down completely.
Overload
The motor could be damaged when overloaded. Do not apply excessive pressure in order to
speed up the cutting process.
Cleaning and maintenance
Before performing any work on the equipment, disconnect the battery.
Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine
