11
battery will resume to normal operation once the excessive current draw has returned to
normal safe level.This may take a few seconds.
Short Circuit Protection:
If the battery pack was to short circuit the short circuit protector
would immediately stop the battery pack form operating.This will ensure that no further
internal components of the battery or the tools are damaged.
Application
The power tool is intended for cutting wood.
IT IS NOT DESIGNED FOR PROFFESIONAL USE.
Assembly
Installing the blade
Install the interior washer on the blade spindle.
Install the blade on its spindle. Check it to be well centered.
Install the exterior washer and introduce the blade fixing screw in its place.
Press the blade lock button (it is places on the back side of blade cover) and rotate the
blade until it locks.
Keep the blade lock button pressed and tighten the blade fixing screw using the included
allen key (10). Be aware that the threading is reversed.
Check if the blade is well fixed.
WARNING! Install the blade according to the indicated rotation direction.
Uninstalling the blade
WARNING! Before uninstalling the blade or any other intervention, wait for the
blade to stop completely.
Press the blade lock button and rotate the blade until it locks.
Keep pressing the blade lock button and loose the blade fixing screw using the allen key
(10). Be aware that the threading is reversed.
Remove respectively, the blade fixing screw, exterior washer, blade and interior washer.
