Evoqua WALLACE & TIERNAN SFC, Original Instruction Manual

Page: 199 / 288

SFC
Operation
6.
199
Smooth switching between operating modes
Switching from automatic to
manual or from manual to
automatic mode
To switch smoothly from automatic to manual mode or from
manual to automatic mode while maintaining the same dosing
capacity:
AUTO -> MANUAL
1 Press and hold the softkey for approx. 2 - 3
seconds to apply the current dosing capacity in manual mode.
The display switches to "Dosing capacity MANUAL".
2 The dosing capacity can now be set manually.
MANUAL -> AUTO
1 Press and hold the softkey for approx. 2 - 3
seconds to apply the current dosing capacity in automatic
mode.
The prompt "Do you wish to use the current dosing capacity?"
is displayed.
2 Press "Yes" to confirm and leave the current dosing capacity
unchanged.
Press "No" to change the dosing capacity.
CHANGE
CHANGE