MFC
General Safety Instructions
2.
7
2. General Safety Instructions
2.1
Intended Use
The MFC (Multi-Function-Controller) is exclusively designed for
measurement and control purposes for the treatment of waste
water, potable water and industrial water.
The MFC may only be used in buildings and under the operating
conditions described in the technical data.
The device is not designed for any application other than that
described in this manual
–
this is contrary to its intended use!
Compliance with the intended use of this device also includes
reading this operating manual and observance of all instructions
which it contains, particularly the safety instructions. Furthermore,
all inspection and maintenance work must be performed at the
prescribed intervals.
If the device is not employed in accordance with its intended use,
safe and reliable operation cannot be guaranteed.
The operator is solely responsible for any personal injury or
damage to property resulting from employment of the device which
is contrary to its intended use! The operator is obliged to keep the
device in proper working order.
Summary of Contents for WALLACE & TIERNAN MFC
