Evoqua WALLACE & TIERNAN MFC, Instruction Manual

Page: 117 / 268

MFC
Operation
5.
117
Softkeys Current softkey assignments.
Stop the adaption procedure.
Select one or more options from the list provided.
Change the operating mode.
Confirm your selection.
Select the "Calibration" menu.
Activate password protection.
Select a menu.
Select the "Mode" menu.
Start deactivation of password protection.
Move up one level.
Open next display.
13s Feed delay
The time until dosing resumes after interruption.
100% Positioner feedback (Ym)
If the display blinks, the positioner is in manual mode and cannot
be activated.
28.4°C Sample water temperature
mA? 1/5 Error indication active (display bottom right)
The system has detected an error. The error can be specified with
the table in chapter 5.5 “Errors" on page 162. The number
combination states the series number of the error message and
the total number of error messages (in this case the first error of a
total of five).
Display number (display bottom right)
This number enables allocation to a menu and stipulates the
sequence within the menu.
PI 85 s YPI stop time display. The time it takes after a spike in the flow rate
for the single feedback closed loop control in the compound-loop-
control to reactivate.
BREAK
SELECT
ENTER
CAL
LOCK
MENU
MODE
UNLOCK
BACK
CHANGE
--->