700 P electronics module
Installation
5.
59
5.5
Electrical installation
Warning!
Risk of injury or damage to the device!
Only authorized and qualified electricians are permitted to install
the 700 P electronics module and open the housing. The 700 P
electronics module may only be put into operation when the hous-
ing is closed, and must be connected to protection earth. Modifica-
tions other than those described in this manual are not permitted.
Only wire the 700 P electronics module when it is disconnected
from the mains power. Connect the 700 P electronics module in
accordance with the wiring diagrams and applicable national and
local regulations.
Danger!
Risk of injury or death!
External voltages may be connected even with the operating volt-
age switched off.
Warning!
Risk of injury or damage to the device!
The 700 P electronics module is not equipped with a mains switch
and is in operation as soon as the supply voltage is applied. An
external switch or circuit breaker with a clearly visible "OFF" switch
position is therefore necessary.
When a local line fuse is used (6 A) at 100 to 240 V AC supply, the
cross-section of the mains cable must be at least 0.75 mm² (AWG
18).
When connecting system components (e.g. devices, motors,
pumps) as well as when entering operating data, the system com-
ponents must be switched off in order to prevent uncontrolled ac-
tivation or any incorrect operation.
Installations with internal supplied loads (e.g. dosing machines) or
models with fixed installed connection wires (plug connection)
must not have a current consumption higher than 6 A.
Please note
The 700 P electronics module is not suitable for electrical connec-
tion with permanently installed cable conduits. If the cable glands
do not meet local installation rules and regulations, these glands
must be replaced with suitable ones.
Summary of Contents for WALLACE & TIERNAN 700 P
