700 P electronics module
Interfaces
4.
45
Please note
For security reasons, access to the 700 P electronics module
should only be given to authorized personnel. Furthermore, per-
manent unsafe connections via the Internet or WLAN are not per-
mitted. Safe connections can for example be set up via a VPN
secured communication channel or an encoded WLAN connec-
tion. The 700 P electronics module is designed for use in an Intra-
net (closed network). Please refer to chapter 2.2 “General safety
instructions”, Section "IT Safety".
The Ethernet connection is designed in accordance with IEEE
802.3. It is designed as an 8P8C socket (often referred to as RJ45
socket) and is screened. Connection to the HUB or switch can be
realized with a 1:1-wire and screened patch cable. Direct connec-
tion to a PC network card is possible using a patch cable (1:1) or
a crossover cable (crossover network cable).
The connection runs in Auto negotiation mode. The data transfer
rate and full or half duplex are defined automatically with the con-
nected switch/HUB.
The Ethernet settings of the 700 P electronics module can be con-
figured via the System settings menu field. In the Ethernet settings
menu, you can select whether the IP address is to be automatically
assigned or permanently assigned. If permanently assigned, the
IP address, Subnet mask and Standard gateway must be entered.
To do so, contact the network administrator if the device is being
integrated in a network. The MAC address can be found on the
back of the HMI but it is also displayed in the Ethernet settings
menu.
Summary of Contents for WALLACE & TIERNAN 700 P
