Evonicfires E-Touch, Installation & User'S Instructions, Page: 7 / 11

4). Once the e - touch control system is paired with the e - series product the “ Home ” screen will appear. (Fig:3)
(Fig:3)
5). Once the above “ Home ” screen appears - this indicates that the e - touch and e - series product are now paired.
6). To Switch on your e - series product Single Press “ A. ”, This will activate the flame effect.
7). To Switch the heater function “ On ” simply increase the Temperature by Pressing “ B. ” the Temperature control keys.
8). To Switch the heater function “ Off ” simply decrease the Temperature by Pressing “ B. ” the Temperature control keys.
9). To Adjust the brightness of the Flame effect simply Increase or decrease the luminescence by Pressing “ C. ” the Dimmer control keys.
10). Please Note: After 1x minute of non use the e - touch will enter sleep mode, this is identified by the screen going blank - to reactivate the e - touch simply
press the screen followed by pressing the “ On/OFF ” button on the top of the e - touch control unit once to commence the scanning process see Page 6 — ( Fig:2).
11). For further Control and function options please refer to pages 8 - 9.
A.
B.
C.
7