Pairing and general Operation of e
-
touch control system:
To Pair the e
-
touch control system with your e
-
series product please follow the below steps:
1). Ensure that the main standby power switch on your e
-
series product is switch to the
“
On
”
position.
(This switch can be located to the right of the heater outlet on your e
-
series product).
Once this switch is activated your e
-
series product will Omit a single flash from the LED
’
s of the flame effect to indicate that the product has power.
2). Switch the e
-
touch control system
“
On
”
by Pressing and hold the On/Off switch located on the top left of the e
-
touch for 4x seconds.
3). Once the
“
start up
”
screen appears
(Fig:1)
displaying the time, date and day, Single Press the On/Off switch once on the e
-
touch control system
-
This will
initiate the e
-
touch to
“
Scan
”
for your e
-
series product. See
(Fig:2).
(Fig:1)
(Fig:2)
6