background image

9

EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1

EVONIC - 104 INSTRUCTION MANUAL TEMPLATE ISS. 1

COSINA ISS. 1

COSINA ISS. 1

 HEARTH SECTION - FIRE CUT-OUT

Check the width of the model you are installing below by scanning 

the QR code, and use a depth of 305mm. Your cut-out depth will now 

line up with the top section of the unit, giving you approximately a 

30mm overhang from the unit. 

Using an appropriate saw, carefully cut these dimensions out of the 

top hearth ready for the fire to be slotted into place. 

On Electra 1250 and 1500 models, which have a narrower case, 

a baton is required to provide extra support to the fire. The baton 

needs to be fixed to the back of the unit. 

305MM

We recommend measuring the width of the case, taking into account the 

fixings on the metalwork which could result in a slight increase in size.

MODEL

CUT-OUT SIZES

E1030 / KIRUNA 

1010mm X 305mm

E1250 / MOTALA / EXOR

1265mm X 305mm

E1500 / LINNEA / LITA

1510mm X 305mm

E1800 / AVESTA / ASTA

1765mm X 305mm

ELECTRA 1250

1265mm X 305mm

ELECTRA 1500

1510mm X 305mm

ELECTRA 1800

1765mm X 305mm

ALISIO 850

864mm X 305mm

ALISIO 1150

1164mm X 305mm

ALISIO 1550

1564mm X 305mm

ALISIO 1850

1864mm X 305mm

Summary of Contents for COSINA
















Reviews: