EVOnet C-FB310 Quick Reference Manual Download Page 3

Network Camera 

 
 

 

 

WARNING 

RISK OF ELECTRIC SHOCK 

DO NOT OPEN 

 

WARNING:

 TO REDUCE THE RISK OF ELECTRIC SHOCK, 

DO NOT REMOVE COVER (OR BACK). 

NO USER-SERVICEABLE PARTS INSIDE. 

REFER SERVICING TO QUALIFIED 

SERVICE PERSONNEL.

 

 

COMPLIANCE NOTICE OF FCC: 

THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS 
A DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS ARE DESIGNED 
TO PROVIDE REASONABLE PROTECTION AGAINST HARMFUL INTERFERENCE WHEN THE 
EQUIPMENT IS OPERATED IN A COMMERCIAL ENVIRONMENT. THIS EQUIPMENT GENERATES, 
USES, AND CAN RADIATE RADIO FREQUENCY ENERGY AND IF NOT INSTALLED AND USED IN 
ACCORDANCE WITH THE INSTRUCTION MANUAL, MAY CAUSE HARMFUL INTERFERENCE TO 
RADIO COMMUNICATIONS. OPERATION OF THIS EQUIPMENT IN A RESIDENTIAL AREA IS 
LIKELY TO CAUSE HARMFUL INTERFERENCE, IN WHICH CASE USERS WILL BE REQUIRED TO 
CORRECT THE INTERFERENCE AT THEIR OWN EXPENSE. 

WARNING: 

CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY 

RESPONSIBLE FOR COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE 
EQUIPMENT. 
THIS CLASS OF DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN 
INTERFERENCE-CAUSING EQUIPMENT REGULATIONS.

 

 

The information in this manual is believed to be accurate as of the date of publication.  We are not responsible for any 
problems resulting from the use thereof.  The information contained herein is subject to change without notice.  
Revisions or new editions to this publication may be issued to incorporate such changes. 

 

The software included in this product contains some Open Sources.  You may obtain the complete 
corresponding source code from us.  See the Open Source Guide on the software CD (OpenSourceGuide\
OpenSourceGuide.pdf) or as a printed document included along with the User's Manual. 

 
 
 

WEEE (

Waste Electrical & Electronic Equipment

 

Correct Disposal of This Product

 

(Applicable in the European Union and other European countries with separate collection systems) 

 

 

This marking shown on the product or its literature, indicates that it should not be disposed with other household 
wastes at the end of its working life.  To prevent possible harm to the environment or human health from uncontrolled 
waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable 
reuse of material resources. 

 

Household users should contact either the retailer where they purchased this product, or their local government 
office, for details of where and how they can take this item for environmentally safe recycling. 

 

Business users should contact their supplier and check the terms and conditions of the purchase contract. This 
product should not be mixed with other commercial wastes for disposal.

 

Summary of Contents for C-FB310





















Reviews: